Levitating by Dua Lipa sample/patches

[hammondking]

To the people who generated these programs and samples, Thank You! I used the program at my rehearsal last night, and the band believed it was a sample from the recording. Saved me from having to figure out how to do this myself.

[WannitBBBad]

To the people who generated these programs and samples, Thank You! I used the program at my rehearsal last night, and the band believed it was a sample from the recording. Saved me from having to figure out how to do this myself.

You're welcome! I started with the program by Kaffimusic and worked from there - glad the band likes it. Take care

[Winds]

Hello, I tried to load the programs created by WannitBBBad but no sound can be heard when I press any keys when selecting the patch. I loaded the nsmp and ns3f file, and tried to link the B panel with the nsmp but no luck. I must have missed a step, any ideas?

[WannitBBBad]

Hello, I tried to load the programs created by WannitBBBad but no sound can be heard when I press any keys when selecting the patch. I loaded the nsmp and ns3f file, and tried to link the B panel with the nsmp but no luck. I must have missed a step, any ideas?

One thing to note is that I use the control pedal to morph levels, so you won't hear anything if you don't have a pedal connected until you manually set the levels. I revised the update in my post to help a little as well. After loading "DL LevitatingP2W.ns3f" you will need to point the panel B synth to "DL Levitating2 W.nsmp" (Nord Sound Manager will convert the file to NSMP3 format) as the program is "looking" for the first sample that I posted. I hope that helps. Take care.

[Winds]

Hi WannitBBBad,

Great job on these samples - they sound wicked!

I was wondering whether you have a WAV of the 3rd chord (Em) without the "slide up" effect overlayed? Would be amazing if you could share!

Thanks!

Unfortunately, as the sample "DL Levitating2 W.nsmp" came straight from the recording, the 3rd chord included that effect; it was the only "clean" sample without other instruments/singing. I'll look into recreating the sample to capture the notes differently to at least capture a fuller sweep if the key is held down. My other sample, "DL Levitating W.nsmp", was created with my Stage 3 and does not include that effect. An option would be to start with the actual recorded sample for the brief into and then move to the one I created with the Stage 3 throughout the song. Good luck to you.

Alright I thought as much as yesterday I was tweaking without my pedal. I'll just wing it during my rehearsals later, will update on feedback!

[Winds]

Hello, I tried to load the programs created by WannitBBBad but no sound can be heard when I press any keys when selecting the patch. I loaded the nsmp and ns3f file, and tried to link the B panel with the nsmp but no luck. I must have missed a step, any ideas?

One thing to note is that I use the control pedal to morph levels, so you won't hear anything if you don't have a pedal connected until you manually set the levels. I revised the update in my post to help a little as well. After loading "DL LevitatingP2W.ns3f" you will need to point the panel B synth to "DL Levitating2 W.nsmp" (Nord Sound Manager will convert the file to NSMP3 format) as the program is "looking" for the first sample that I posted. I hope that helps. Take care.

Hey there. I think I got the P1W working fine. But the P2W I didn't seem to get it work correctly. Can you help me diagnose what step I must have missed?

[WannitBBBad]

Hey there. I think I got the P1W working fine. But the P2W I didn't seem to get it work correctly. Can you help me diagnose what step I must have missed?

I created P1W to make the sample I originally used for P2W, so it isn't needed to play the song. After creating P2W I put together a different sample taken from the original recording, so the program needs to be pointed to the new sample. Here are the steps needed:

a) Open Nord Sound Manager and select "Organize" mode.
b) Load the sample "DL Levitating2 W.nsmp" into an open sample memory slot. NSM will covert it to NSMP3 format. Note which location the sample is saved.
c) Load the program "DL LevitatingP2W.ns3f".
d) Select the program on your Stage 3, switch to Panel B, and turn the OSC1 Waveform dial to go to the sample location of "DL Levitating2 W".
e) Save the program with the proper sample selected.

Let me know if that works for you. Take care

[Winds]

Hey there. I think I got the P1W working fine. But the P2W I didn't seem to get it work correctly. Can you help me diagnose what step I must have missed?

I created P1W to make the sample I originally used for P2W, so it isn't needed to play the song. After creating P2W I put together a different sample taken from the original recording, so the program needs to be pointed to the new sample. Here are the steps needed:

a) Open Nord Sound Manager and select "Organize" mode.
b) Load the sample "DL Levitating2 W.nsmp" into an open sample memory slot. NSM will covert it to NSMP3 format. Note which location the sample is saved.
c) Load the program "DL LevitatingP2W.ns3f".
d) Select the program on your Stage 3, switch to Panel B, and turn the OSC1 Waveform dial to go to the sample location of "DL Levitating2 W".
e) Save the program with the proper sample selected.

Let me know if that works for you. Take care

Works golden, thanks very much bro!