Pitch bend

[jazzhill]

Who knows how can connect Smart Pitch Bend Pro (app) to NE 6D ?

[maxpiano]

NE6D supports USB MIDI, set NE6D Glovìbal Channel (e.g. to 1) , USB-connect it to the computer/tablet running that App and have the App send PB messages to the NE6D USB MIDI "IN" Port and of course on the same channel (e.g. 1)

PS: welcome to NUF... a little salutation before just asking a question would have been appreciated

EDIT: correction! PB on NE6 works only on EXT KB Channel, see following posts

[jazzhill]

Thx, I´ll try it....

[jazzhill]

Are you sure the NE6D reacts to pitch bend? Weren't there some restrictions?

[jazzhill]

Are you sure the NE6D reacts to pitch bend? Weren't there some restrictions?

Right Fziegler, thanks for reminding, as per NE6 update history: https://www.nordkeyboards.com/update-hi ... e-history/

MIDI Pitch Bend is now listened to on External KB MIDI channel.

So it won't work on Global Channel, but only on Ext KB Channel i.e. on NE6 sections assigned to External KB (not played by NE6 unless with the same PC/tablet you don't reroute also the NE6 MIDI OUT flow from Global Channel back to the NE6 IN on EXT KB one)

[jazzhill]

That all is right. I´ve sent on Global 1, recieve on Ektkb 16, kbd zone Lo.... Indicator on interface light In and Out too, but no sound

[jazzhill]

472976756_565332443152961_271441518808773470_n.jpg (163.67 KiB) Viewed 2395 times

[maxpiano]

Which app are you using to reroute Midi Notes from ch 1 to 16? If you are on a PC try MidiOx or Camelot Pro (Free version)

[FZiegler]

That should be set directly within the (Smart) PitchBend Pro app - for both MIDI-in and MIDI-out. Just see

[maxpiano]

Uhm... OK so in that Filters page you should be able to map Channel 1 to 16: is this what you did @jazzhill?
Do you have any MIDI Monitoring app to see if that is happening?