This 'unofficial' Forum is dedicated to the Clavia Nord Keyboards, including the Nord Stage, Nord Electro and Nord Piano. Discuss any issues around Nord's keyboards, share your favorite patches, samples, and music. We are not affiliated with Clavia! https://www.norduserforum.com/
Either 2 powered monitors or a leslie and 1 powered monitor for hone and stage. Ev zlx12p and Q SC K 10 are fairly comparable but qscs cost Tice as much... leslie studio 12 is on its way. Couldn't be more excited to move air on stage again... worth the hassle imho
Re: Amplifier for C2D
Posted: 01 May 2015, 17:06
by marcoballa
ciao from Italy,
my preferred choice (for home and little stages setup) is Roland SA-1000 stereo amp.
Unfortunately it has been discontinued, but the "philosophy" is the right one: stereo drivers on the upper part, mono subwoofer on bottom, as the real leslie. Here an example (at home):
(I also use Leslie 3300 and Tornado portable rotary cabinet)
Re: Amplifier for C2D
Posted: 02 May 2015, 08:36
by orcoaffamato
Ciao!
marcoballa wrote:Unfortunately it has been discontinued
It's a pity
Now I'm waiting for this to magically appear in some store:
Re: Amplifier for C2D
Posted: 05 May 2015, 16:14
by tacitus
Absolutely agree with you on the level issue, Redleo, but using PA speakers at home is unlikely to need all the available volume anyway. The rig I described above is what I'd gig with except I'd then have a mixer in circuit, partly to allow more inputs, but also to up the volume available. There is definitely more there with a mixer; the question is whether you need it (or can get away with it!) at home. Beyond question that the Nord output is a rather feeble line level - but unless you're going into to something truly feeble it probably won't hurt in a domestic situation, with a smaller room and, I would guess, nothing like a full band to play along with ...
Re: Amplifier for C2D
Posted: 05 May 2015, 16:16
by tacitus
Oops - posted a reply there without going to the end of the thread ... please forgive my senior moment.
Re: Amplifier for C2D
Posted: 05 May 2015, 23:37
by Six-string-man
orcoaffamato wrote:Ciao!
marcoballa wrote:Unfortunately it has been discontinued
It's a pity
Now I'm waiting for this to magically appear in some store:
Due into Thomann in Germany in late June. they will be the only distributor for the whole of Europe.