Google sheet for NS4 issues/bugs

[StuartR]

On OS 1.14, when using a momentary foot switch, the Layer Scene II control is momentary, not toggling.

Yes, this was a deliberate choice by Nord. I sent them a request to add the option to latch and they agreed to add that in a future update

[Nordlicht]

I have checked and marked as "fixed" the following (former) bugs no. 5 and 19.

Addition/proposal:
When selecting programs or presets in "list mode" the Categories should be in alphabetical order.
In the list mode for the Presets, the possibility to search alphabetically is missing.

[Nanawel]

Hi, I've added a line in bug sheet : KB track doesnt works on analog waveforms and samples? It has no incidence on filter sound in lower frequencies in both 1/3 2/3 or 3/3 settings... do you notice it also?

[Nordlicht]

Hi, I've added a line in bug sheet : KB track doesnt works on analog waveforms and samples? It has no incidence on filter sound in lower frequencies in both 1/3 2/3 or 3/3 settings... do you notice it also?

At my NS it works like it should (V 1.14).

[Nanawel]

Ok i remove it of bug list and see if it’s an issue on mine only

[Nordlicht]

Ok i remove it of bug list and see if it’s an issue on mine only

Strange anyway.
I’ve done a quick test with a Pure Saw, full resonance and playing low keys and changing keyboard tracking at the same time.
It also worked with samples (but you have to pay attention that the filter section is turned ON after choosing a sample.

[Renard33]

Problem with "Morphing" a CC value for an external synth. Especially with the control pedal.

For exemple, I program the nord to modulate the Filter Cutoff of my Prophet 6 (CC number #102) with the expression pedal (morph). Everything works fine. I save the patch. Go to another patch, come back, sometimes, it will works again, but sometimes the filter will open eratically. Than I cancel the morph programmation, and the pedal continue to control the Cutoff of the synth eratically.

Other exemple, on another patch, sometimes, the pedal will control the volume of my prophet 6 even if I didn't program it (with the morph section).

I MADE SURE THAT THE SECTION "SEND CONTROL PEDAL" in the EXTERN MENU is all off. I made sur too that there's no other midi channel in conflict in the MIDI MENU section (I've put all OFF or to channel 16).

I'm using a pedal Boss FV500L (the expression jack TRS). I've tried 2 other pedal (another Boss and a MOOG one). I've tried 4 different TRS cables. The pedal still works fine on my NS2.

I use to do that for 5 years with a NS2 and NS3 and it worked fine.

[StuartR]

Problem with "Morphing" a CC value for an external synth. Especially with the control pedal.

For exemple, I program the nord to modulate the Filter Cutoff of my Prophet 6 (CC number #102) with the expression pedal (morph). Everything works fine. I save the patch. Go to another patch, come back, sometimes, it will works again, but sometimes the filter will open eratically. Than I cancel the morph programmation, and the pedal continue to control the Cutoff of the synth eratically.

Other exemple, on another patch, sometimes, the pedal will control the volume of my prophet 6 even if I didn't program it (with the morph section).

I MADE SURE THAT THE SECTION "SEND CONTROL PEDAL" in the EXTERN MENU is all off. I made sur too that there's no other midi channel in conflict in the MIDI MENU section (I've put all OFF or to channel 16).

I'm using a pedal Boss FV500L (the expression jack TRS). I've tried 2 other pedal (another Boss and a MOOG one). I've tried 4 different TRS cables. The pedal still works fine on my NS2.

I use to do that for 5 years with a NS2 and NS3 and it worked fine.

And you've sent this issue to Nord, using the official support page form, right?

[Renard33]

And you've sent this issue to Nord, using the official support page form, right?

I did, but a guy from the distribution center (Jam Industries) in Montreal called me, he said I have to report the problem here in order to fix it in the next OS update.

[maxpiano]

And you've sent this issue to Nord, using the official support page form, right?

I did, but a guy from the distribution center (Jam Industries) in Montreal called me, he said I have to report the problem here in order to fix it in the next OS update.

Sorry to say, but that guy gave you a wrong info... this is not Nord support, this is an unofficial forum of Nord users, not affiliated with Clavia, the local distributor is your official contact nad responsible for tracking your claim to Nord/Clavia, tell him..