I have a Nord Electro 6 and have connected a BeatBars FS3 MIDI footswitch to control the rotary speed by sending MIDI CC# 108 to the Electro.
My program starts with the rotary set to slow, so when I press the footswitch the rotary changes to fast as expected. However the next time I press the footswitch the rotary changes to stop. Further operations just toggle between fast and stop. I expected it to toggle between fast and slow.
Can anyone advise what I might need to do to achieve the required toggle between fast and slow.
Regards, Rob
Electro 6 Switching Rotary Speed Via MIDI Footswitch
-
Schorsch
- Donator
- Posts: 2462
- Joined: 15 May 2018, 23:34
- 6
- Your Nord Gear #1: Nord Stage 3
- Your Nord Gear #2: Nord Stage 3
- Location: Germany - NRW
- Has thanked: 1387 times
- Been thanked: 881 times
Re: Electro 6 Switching Rotary Speed Via MIDI Footswitch
Hi,
what are the values sent for cc108?
Have a look here (found that with a simple search in that forum): https://www.norduserforum.com/viewtopi ... 08#p128748
There it‘s said that the values for rotor fast / slow are
fast=127
slow=43
what are the values sent for cc108?
Have a look here (found that with a simple search in that forum): https://www.norduserforum.com/viewtopi ... 08#p128748
There it‘s said that the values for rotor fast / slow are
fast=127
slow=43
Regards Schorsch
Check this awesome website to visualize NS2/3 programs and re-create them on the other instrument!
Gear: NS3C, Uhl X4V-1, 2-manual HX3.4 organ made by Tastendoktor, SL88 Studio
Check this awesome website to visualize NS2/3 programs and re-create them on the other instrument!
Gear: NS3C, Uhl X4V-1, 2-manual HX3.4 organ made by Tastendoktor, SL88 Studio
-
robtn
- Posts: 4
- Joined: 28 Jul 2022, 13:32
- 2
- Your Nord Gear #1: Nord Electro 6
- Has thanked: 3 times
- Been thanked: 1 time
Re: Electro 6 Switching Rotary Speed Via MIDI Footswitch
Thankyou Schorsch
The values being sent were 0 and 127 - the default settings for the footswitch. Having now corrected these to the values you suggest it now toggles from fast to slow.
Thankyou for your help, greatly appreciated.
Rob
The values being sent were 0 and 127 - the default settings for the footswitch. Having now corrected these to the values you suggest it now toggles from fast to slow.
Thankyou for your help, greatly appreciated.
Rob