Nord User Forum

Does somebody know how I can send programchanges with mainstage to my NS2 to different banks. I like to adress the programs in the D bank from my NS2. Like D 4.1
Thanks,
Rene

i read the manual very quickly, but couldn't find any information about how the NS2 banks are numbered.... perhaps Clavia has forgotten to include that information within the manual? i suggest you contact the support for correct answers.

please post back what they said.

Hi Henrik,
I'll do that.
First I will ask the shop where I bought my NS2
Cheers,
Rene

Hi Henrik,
I have been in contact with Nord. I have got the information and it is working.
To adres the Progamchanges from the NS2 in
Bank A: You need to put bank select MSB = 0 and LSB = 0
Bank B: You need to put bank select MSB = 0 and LSB = 1
Bank C: You need to put bank select MSB = 0 and LSB = 2
Bank D: You need to put bank select MSB = 0 and LSB = 3
Programchange 100, 101, 102, 103, 104 are allway the live mode. The banknumbers are not working there

Rene

thank you very much for solving this out, Rene!

if you don't mind i would like to change the name of this thread, so it will be easy to find when searching this forum for MSB and LSB?

Henrik,
It's oke by me to change the name of the thread.
Bye,
Rene

Thanks Rene :-)

Alain

I have a strange behaviour here :
I'm trying to access the B bank using an AX7 controller.

Entering the SLB/MSB/CC (c00 C32 and pc) works fine.
But when I save the configuration in a bank slot (let's say C00=0 C32=1 PC=4 in slot A55) on the AX7, if I select another alot then back to A55, it does not change the MSB/LSB/CC ?

I need to stay in "edit mode" and change the CC value to trigger the Nord B Bank.

I've been doing this for years... getting old ?

Thanks for any advice !

Fred

cookie wrote:I have a strange behaviour here :
I'm trying to access the B bank using an AX7 controller.

Entering the SLB/MSB/CC (c00 C32 and pc) works fine.
But when I save the configuration in a bank slot (let's say C00=0 C32=1 PC=4 in slot A55) on the AX7, if I select another alot then back to A55, it does not change the MSB/LSB/CC ?

I need to stay in "edit mode" and change the CC value to trigger the Nord B Bank.

I've been doing this for years... getting old ?

Thanks for any advice !

Fred

To edit/save a patch on the AX-7:

First, make sure you have the 'Lower' layer red light on, then...
Press 'Edit' and change the C00 (MSB), C32 (LSB), and patch change number.
Press and hold 'WRITE' - press A (or) B + desired slot number + Enter

This should save the patch/slot settings for recall.

I have a simple Excel file to help translate Nord Stage 2 to Midi. It might be of some help.