Drum 3p Parameter Bleed?
-
Douggiechimes
- Posts: 2
- Joined: 14 Aug 2022, 19:23
- 2
- Your Nord Gear #1: Nord Lead 4
- Your Nord Gear #2: Nord Drum 3P
Drum 3p Parameter Bleed?
When I am changing parameters on Channel 4, the settings on Channels 5 and 6 will also change. Any parameter change on 4, 5, or 6 will change all the channel settings for those pads. This isn’t happening for channels 1-3. “Edit All Channels” is definitely off. I have consulted manual and forums. Please advise.
-
wartaler
- Moderator
- Posts: 755
- Joined: 19 Mar 2009, 18:32
- 15
- Your Nord Gear #1: Nord Stage Classic
- Your Nord Gear #2: Nord Drum 2
- Has thanked: 88 times
- Been thanked: 219 times
Re: Drum 3p Parameter Bleed?
Hi Douggiechimes!
Which parameters, all sound parameters I presume? Are you editing the parameters via MIDI or directly on the unit itself?
If via MIDI, check the individual MIDI channel settings, perhaps a couple of drum channels are sharing the same individual MIDI channel?
If you're editing on the unit itself, is it connected to any external gear or computer via MIDI? I was thinking it's perhaps MIDI messages looping back to individual channels.
Cheers,
Albert
Which parameters, all sound parameters I presume? Are you editing the parameters via MIDI or directly on the unit itself?
If via MIDI, check the individual MIDI channel settings, perhaps a couple of drum channels are sharing the same individual MIDI channel?
If you're editing on the unit itself, is it connected to any external gear or computer via MIDI? I was thinking it's perhaps MIDI messages looping back to individual channels.
Cheers,
Albert
Last edited by wartaler on 11 Aug 2023, 09:07, edited 2 times in total.
Nord Drum 2, Drum (1), Lead 4, Lead 2x, Stage 'Classic', Micro Modular